Craftsman 316.79197 manual OilFillPlug, Minimum, 15.24 crn

OilFillPlug

				Spark
			Muffler	Plug
		Starter	Rope
		Grip
		Shaft	Grip
		On/Off Stop
	D=Handle	Control
				_l Cap
			Cold Weather
	Twist & Edge and		Start Lever
	Craftsman
	Convertible TM Coupler
		Throttle
Line		Control
Cutting
Blade	Shaft
	Housing	Air Filter Cover		Primer Bulb

\

Cutting Attachment

Shield

Hassle-Free TM Plus

UNIT UNTIL THE D-HANDLE HAS BEEN ROTATED

!_,ARNING: DO NOT ATTEMPT TO USE THIS

INTO OPERATING POSITION (Fig. 1).

ADJUSTING THE D-HANDLE

1.Loosen the screws on the D-handle (Fig. 1).

On/Off Stop Control	(4) Screws
Shaft
Housing
Shaft Grip

Minimum 6

(15.24 crn)

D=Handle_

Bottom Clamp

Fig. t

2.While holding the unit in the operating position (Fig. 2), position the D-handle to the location that provides you the best grip.

3.Tighten the clamp screws evenly, until the D-handle is secure.

iNSTALL MNE TRIMMER ATTACHMENT

NOTE: To make installation easier, place the unit on the ground or on a workbench.

1.Turn knob counterclockwise to loosen coupler (Fig. 16, p. 9).

2.While firmly holding attachment, push it straight into the coupler until the release button snaps into the primary hole (Fig. 17, p. 9).

NOTE: Aligning the release button with the guide recess (Fig. 17, p. 9) will help installation.

3.Turn the knob clockwise to tighten.

LINE TRIMMER APPLICATIONS				_u_
Cutting grass and light weeds;
edging;	and	decorative	trimming	Fig. 2
around	trees,	fences,	etc.