ASSEMBLY

(If toolis received assembled, repeat all steps in this justed for the operator.)

PREPARATION

This Manual is designed to help you assemble the tool and to provide its safe operation. It is important that you read the entire manual to become familiar with the tool before you begin assembly. If you have any

questions or need further assistance, call our

CUSTOMER ASSISTANCE HOTLINE at

1-800-235-5878.

1. Read your Operator's Manual _

2.Tools you will need:

-Hex Wrench provided with the tool.

-Adjustable Wrench

-Standard Screwdriver

ASSEMBLY STEPS (Refer to illustrations)

TUBE

•Place the two screws "A." into the holes on the

engine as shown in the illustration. Make sure screws are fully seated in the holes.

•Position the. nuts. "l. "in the lower holes.

•• Tighten the screws with the hex wrench (pro-

vided) just enough to hold the hardware to-

gether while holding the locknuts with your other hand.

•Remove the pacldng cover from the straight end of the shaft housing if so equipped. Your unit may not have a packing cover.

Make sure the shaft inside the tube does not fall out of the tube. Dirt on the shaft will sig- nificantly reduce the life of the unit. If the drive

shaft falIs out ofthe housing, clean, re-lubricate,

and re-install. See "Drive Shaft Lubrication in

the Customer Responsibilities section.

•Align the'_bottom groove on the tube with the ridge on the lower wail of the engine opening.

•Turn the shaft to align the square end of the shaft with the square hole inside the front opening of the engine.

•Firmly push the tube into the engine opening until the top groove is no longer visible.

•Tighten screws "A." alternately with the hex wrench until secure.

section to be sure assembly is correct pad is ad-

:i

 

.

. ' •

, •

9_..----

Screw

"A"

 

 

 

that may be on the end of the

,__

/

tube.

Remove an, packin, materi._ "

Ridgeand bottom

groove

Turn the arbor shaft to align the shaft with the square hole.

-6-

Page 5 Page 7
Page 6
Image 6
Craftsman 358.798260-32cc manual Customer Responsibilities section, Tube, Ridgeand bottom
Page 5 Page 7

358.798260-32cc specifications

The Craftsman 358.798260 is a versatile 32cc gas-powered string trimmer that offers both power and precision for residential and professional lawn care. Designed for those who require efficiency without sacrificing comfort, this trimmer stands out with its blend of innovative technologies and well-thought-out design features.

One of the main highlights of the Craftsman 358.798260 is its robust 32cc two-cycle engine. This powerful engine facilitates easy cutting through thick grass and stubborn weeds, providing reliable performance for various outdoor tasks. The engine is tuned for efficient fuel consumption, allowing users to maximize their operational time while minimizing refueling interruptions.

Equipped with an easy start technology, this trimmer allows users to start the engine with minimal effort, reducing pull starts. This feature is particularly beneficial for those who may struggle with traditional starting mechanisms. Additionally, the Craftsman 358.798260 boasts a lightweight design that enhances maneuverability and reduces user fatigue, allowing for long periods of use without discomfort.

Another notable characteristic of the Craftsman 358.798260 trimmer is its 18-inch cutting path. This provides a broad area for cutting, significantly improving efficiency while trimming around edges, flower beds, and other hard-to-reach areas. The trimmer head is designed with a dual line, which ensures that weeds and grass are cut cleanly and effectively, ensuring a neat finish.

For enhanced user control, the Craftsman 358.798260 features an adjustable dual handle system that allows users to change their grip for optimal comfort and balance. This feature helps users maintain control over the trimmer, whether they are working at ground level or accessing higher areas.

Additionally, the trimmer is designed with durability in mind, featuring high-quality materials that withstand the rigors of regular use. The anti-vibration technology integrated into the design helps to reduce operator fatigue, making it suitable for extended use without discomfort.

In summary, the Craftsman 358.798260 string trimmer is a powerful, efficient, and user-friendly outdoor tool that meets the demands of both homeowners and professionals alike. With its strong engine, lightweight design, and ergonomic features, it offers an optimal balance of power and precision for achieving a well-maintained landscape.
Top Page Image Contents