![TRACTIONLOCKPiNS](/images/new-backgrounds/101491/10149135x1.webp)
OPERATION
,_ WARNING:Read Operator'sManual before operating machine. This machine can be dangerousif used
carelessly.
,,Never operatethe snowthrower without all guards,covers, shields in place.
,,Never direct dischargetowards windows or allow bystandersnear machine while engine is running.
,,Stop the engine whenever leaving the operating position.
,,Disconnectspark plug beforeuncloggingthe impeller housingor the dischargechute and before making repairs or adjustments.
,,Whenleavingthe machine, removethe safety key. To reducethe risk of fire, keep the machine cleanand free from spilled gas, oil, and debris.
TRACTIONLOCKPiNS
Therighttractionwheelcanbecompletelyreleasedusingthe lockingpin (A,Figure16).Thisallowstheunit to beeasilymovedwiththeengineoff.
STOPTHESNOWTHROWER
1.Releasethetractiondriveclutchlever(B,Figure15).
2.PushtheON/OFFswitch(A,Figure22)totheOFFpositionandpulloutthe safetykey(B).
CHECK THE OiL (BEFORE STARTING ENGINE)
NOTE:The engine was shippedfrom the factory filled with oil. Check the level of the oil. Add oil as needed.
1.Makesuretheunit is level.Useahighqualitydetergentoil classified "ForServiceSF,SH,SJ, SL,or higher".
2.Removetheoilfill cap/dipstick(A,Figure17)andwipewithacleancloth.
3.Insertthe oilfill cap/dipstickandturnclockwiseto tighten.
4.Removetheoilfillcap/dipstickandchecktheoil.
NOTE:Do not checkthe level of the oil while the engine runs.
5.If necessary,addoil until theoil reachestheFULLmarkontheoil fill cap/dipstickDonotaddtoo. muchoil.
6.Tightentheoilfillcap/dipsticksecurelyeachtimeyouchecktheoil
level.
NOTE:For extreme cold operating conditionsof
below, use a synthetic5W30 motor oil for easier starting.
NOTE:S.A.E. 5W30 motoroil may be used to make starting easier in areas where the temperature is 20°F
DO NOTmix oil with gasoline. See Chartfor oil recommenda- tions.
Traction Lock Pins | Figure 16 |
oF°C
0_._ _''__" _' 40
' '_"...............30
50 | _ |
|
32 |
|
|
14 |
|
|
_ | € | |
|
| |
|
|
Below40°F(4°C)the useofSAE30will result in hardstarting.
**Above80°F(27°C)the useof
FULL
Checkingthe Oil | Figure 17 |
18