Crane Merchandising Systems 673, 677, 675 manual Acc

HDC II Programming Guide			Monetary Setup
2.	Press	until one of the following is displayed:
3.	<	-Accept any bill of value $X.XX or less, regardless of avail-
	able change. Hold the last bill which meets or exceeds maximum price in
	escrow. (This setting is normally used.)
			- OR -
4.	ACC	-Accept any bill of value $X.XX or less, regardless of avail-
	able change. Immediately stack the last bill.
	Example: If setting is		and maximum price is $1.50. This
	setting will immediately stack the second $1.00 bill inserted.
5.	Press	to display the desired choice.
6.	The value of "	" has two purposes:

a.	The value of "		" tells the machine how big a bill or coin to accept
	even though there is not enough change in the coin mech to cover all
	possible paybacks.
	For example, enter 1.00. Therefore, the machine will take a dollar bill
	or coin even though there is less than $1.00's worth of change. Entering
	5.00 tells the machine to take a five even though there is less than
	$5.00's worth of change, and so forth.
	=$$X.			NOTE
	This could cause a customer to be short-changed.
	Entering 0.00 means that bills or coins not held in escrow or in a tube
	will only be accepted if there is enough change to cover them.
b.	The.STKvalueX.XXof "		" tells the machine how much the customer is allowed
	to overbuy a product. The customer will be short-changed when an
	overbuy occurs Example:ACC.STK1.00
	For a value of $0.25: if there is no change in the machine and the cus-
	tomer inserts a $1.00 bill. The customer can purchase a product for
	$0.75 even though the change cannot be paid back. The customer will
	be short-changed. Normally a purchase will not be approved unless all
	change canX.XXbe paid.
		X.XX
	Entering 0.00 means that the vend will only be approved when the cor-
	rect change can be returned (overbuy disabled).
		X.XX
July, 2003				16	6730018