Chapter
in device Edit mode or refer to Appendix A.
After you have made your changes, press the device button again. You will hear three beeps and UCommand will go back to normal operational mode.
A. |
Changing the AUX Device Layout
The AUX Device screen layout can be made identical to any of the other device buttons. Enter LCD layout edit mode for the AUX Device button by pressing the AUX button for three seconds (for details refer to Changing the LCD Layout). When the screen flashes, press the device button of the device you want to copy. This device layout is copied to the AUX button. Press the AUX button again. You will hear three beeps and UCommand will return to normal operating mode.
Macro Function
The macro feature enables you to store up to 25 commands for each macro. When you have created a macro, you will be able to run a chain of commands by pushing only one button. You can assign macros to any regular button but not to device buttons.
Macro Setup
Follow these instructions to set up a macro:
22
