Chapter 3-Operating UCommand UC-515
Press Power. This powers your VCR on.
Press Play. This command will start playing the tape in your VCR.
Press Learn again to complete the current macro setup. You can then continue to set up another macro function, or press Learn twice to exit the macro setup.
1 |
1 |
1 |
Running the Macro
To run the macro, press the button that you assigned when you recorded the macro. In the preceding example the following events will happen when you press 1 in the AUX device screen:
1.TV turns on
2.Ten second delay
3.TV switches to video mode
28
