Crown 137769-3 Basic Processing Functions, Signal Path Tab, Cinema Surround Form, Input Select

DBC Network Bridge

4 Operation

4.7 Basic Processing Functions

This section covers the basic processing functions found in the DBC Network Bridge configuration section of IQwic.

4.7.1 Signal Path Tab, Cinema Surround Form

Click on the Signal Path tab and the Cinema Surround but-

ton at the top to view the Signal Path window (Figure 4.7). Its features are described below.

1. Cinema Surround / Advanced Buttons

Selecting Cinema Surround will access the most common processing for Cinema Surround systems. Selecting Advanced will access the more advanced processing functions. Advanced processing is described in Chapter 5. For now, click on Cinema

Surround.

2. Per-Channel Signal Processing

To the right of each output channel are three greyed-out icons. They light when turned on within the window for each process. From left to right, they are Input Compressor, Input Delay, and EQ Filters (described on the next few pages). Clicking on any of those three icons for each channel will open its settings window. At the far right side is a greyed-out icon. Clicking on it opens the All Outputs Level Setting window, described later.

3. DBC Network Channel Assign

Clicking on this button opens a window for CobraNet Output, allowing you to configure your CobraNet digital audio channels on the DBC Network.

4. Input Select

Click on the input signal that you want to process: AES/EBU, Analog, Auxiliary or CobraNet.

5. Booth Monitor Source Select

Clicking this button opens a window that lets you select the source that feeds the Monitor Output connector on the DBC Net- work Bridge.

6.CobraNet Input Graphic

This is a graphic, not a button, which shows that CobraNet Inputs feed into the Booth Monitor Source Select.

1

3

4

2

5

6

Figure 4.7 Signal Path Window

Operation Manual page 27