DBC Network Bridge

4 Operation

4.8 General Firmware Features

Note: The following features are accessed via IQwic software unless otherwise stated. Refer to Figure 4.24, DBC Network Bridge Signal Flow Block Dia- gram for feature locations in the audio signal chain.

4.8.1 Input Level Meters

Audio level peak program meters are provided for each input. The meters sense the audio signal immediately after analog to digital conversion, and respond with 1.7 millisecond attack and 350 milli- second release. Meter range is from –60 to +20 dBu with 0.5 dB resolution. Calibration is in dBu when the input is in “line” mode and set at 0 dB.

4.8.2 Input Dynamic Cut/Boost Meters

Meters are provided for each Input A/B Processing Section to indicate the overall cut or boost being applied from all signal processing features that affect input gain, including Auto-Leveler, Input Compressor, and Auto-Mixing. Meter range is from –60 to +20 dBu with 0.5 dB resolution.

4.8.3 Output Level Meters

Audio level meters are provided for each output. The

4.8.5 Memory Backup

The DBC Network Bridge settings are stored in high-endurance flash memory whenever a parame- ter is changed. Changed settings are updated every few seconds.

4.8.6 Presets

The parameters for all functions in the DBC Network Bridge can be saved as presets and each can be given a unique 32-character name. A total of 32 user presets can be stored in the DBC Network Bridge’s flash memory. Presets can be recalled via the front-panel selector buttons, IQ for Windows preset selector controls, from within events, or by an external system controller via the Multi-Function Control Port.

Preset Segue: When a preset is selected, the Preset Segue feature provides a smooth transition to the new preset. Preset Segue can be set to either a fixed time in seconds or a fixed rate in dB per sec- ond. Range for fixed time in seconds is 1 to 255 seconds. Range for fixed rate in dB per second is from 0.5 dB to 40 dB.

4.8.7 Real Time Clock

Power Supply

100 VAC - 240 VAC 50/60 Hz

System Control

Front

Display

DSP

Audio

Audio

Input

Output

meters sense the audio signal immediately after the audio output processing block, and respond with 1.7-millisecond attack and 350-millisecond release. Meter range is from –60 to +20 dBu with 0.5 dB resolution.

4.8.4Output Dynamic Cut/Boost Meters

Meters are provided for each output to indicate the overall cut or boost being applied from all signal processing features that affect output gain, includ- ing Ambient-Leveler and Output Limiter. Meter range is from –60 to +20 dBu with 0.5 dB resolu- tion.

The onboard Real Time Clock tracks day, date, hour, minute and second, and may be set to any date and time desired, or to match that of the computer run- ning IQ for Windows software. The clock is used as a time reference for the Events Scheduling feature. Internal capacitor storage allows the clock to run for up to 45 days without power being applied to the DBC Network Bridge.

4.8.8 Events

User presets can be scheduled for recall as an Event at a specific date and time, and also can be set to repeat. A total of 32 Events can be scheduled, and each Event can be given a unique 32-character name.

Control

 

 

 

Port

8

Digital DB25 inputs

CobraNet

 

 

8

Analog DB25 inputs

 

 

 

2

Auxiliary analog inputs

 

Figure 4.24 DBC Network Bridge Signal Flow Block Diagram

Operation Manual

page 43

Page 43
Image 43
Crown 137769-3 General Firmware Features Input Level Meters, Input Dynamic Cut/Boost Meters, Memory Backup, Events

137769-3 specifications

Crown 137769-3 is a state-of-the-art electric forklift designed to meet the demands of modern material handling and warehouse operations. Known for its robust performance and advanced technology, this model is favored by businesses seeking efficiency and reliability.

One of the standout features of the Crown 137769-3 is its exceptional lifting capacity. With the ability to lift heavy loads with ease, it is perfect for high-capacity warehouses and industrial environments. The forklift also boasts an impressive lifting height, allowing for the stacking of goods in high racks, maximizing vertical space and optimizing storage solutions.

The ergonomics of the Crown 137769-3 are meticulously designed to enhance operator comfort and productivity. The spacious operator compartment offers ample legroom and an adjustable seat, reducing fatigue during long shifts. Additionally, the intuitive controls and clear visibility contribute to a safer and more efficient working environment, minimizing the risk of accidents.

Crown’s innovative technologies are at the forefront of the 137769-3's appeal. It features the Crown Engineered Reliability (Crown ER) system, which ensures that critical components are built to last, significantly reducing maintenance needs and downtime. The integrated monitoring system provides real-time data on performance, vehicle status, and battery life, enabling managers to optimize operations effectively.

Another key technology featured in this model is the smart traction control system, designed to provide enhanced stability and control, particularly in uneven terrains. This feature is essential for preventing tip-overs and ensuring the safety of both the operator and the loads being transported.

The Crown 137769-3 is powered by long-lasting batteries that offer impressive run times, allowing for extended usage without frequent recharging. This efficiency helps businesses maximize productivity while minimizing energy costs.

In summary, the Crown 137769-3 combines impressive lifting capabilities, advanced ergonomics, robust technology, and energy efficiency, making it an ideal choice for any warehouse operation. Its reliability, safety features, and user-friendly design contribute to a seamless operational experience, ensuring that businesses can keep pace with the demands of modern logistics and distribution. This model stands out as an excellent investment for companies striving for excellence in material handling.