Crown 137769-3 Input Path, Input Selector, Input Meter, Input Select Switch, Input Window Link

DBC Network Bridge

5 Advanced Operation

5.3.1 Input Path

Starting from the Signal Path window, you can access the Input Path window (Figure 5.17) for any channel 1

by clicking on either an input-select button or the Input Path icon (shown above) for the channel.

1. Input Selector

Choose which input channel to view by either pressing the blue or green input channel required or, pick an

input from the drop-down box.	2
2. Input Meter
The switched input signal is sampled and displayed.

3. Input Select Switch

The signal that is input to each of the Input Processing Sections can be either the associated analog audio sig- nal from the rear panel or the associated CobraNet input.

4. Input Processing Selection

Displays the DSP processes available to the selected input path. If the icons are colored, the processes are enabled. Click on the process box in order to edit its parameters.

5. Input Signal Fader, Muter, and Inverter

The output of each of the Input Processing Sections has a fader associated with it prior to the Matrix Mixer. In addition, the Input Processing Section has a muter and inverter.

6. Input Window Link

This button opens a further window (Figure 5.18) that displays all the input gain faders with level meters, mute, polarity and input select switches. It provides an overview of the Input Processing Section DSP processes that are enabled/disabled for the selected input channel.

7. Outputs

Controls the “mix” level or matrix level of that particular input to the various outputs available on the unit.

7

4 5

3

6

Figure 5.17 Input Path Window

Figure 5.18 Input Window

Operation Manual page 55