Crown 137769-3 operation manual All Outputs Volume Controls, Master fader works like this

DBC Network Bridge

4Operation

4.7.5All Outputs Volume Controls

To open the volume controls for the output channels, click on the All Outputs icon in the Cinema Surround Signal Path window. See Figure 4.12. Here you can adjust the level, muting, and polarity of each channel.

The master fader works like this:

•After you set the individual channel levels, their relative positions will be maintained when you move the mas- ter fader. It acts like a group fader.

•If you bring the master fader all the way down and back up without releasing the mouse button, the individual channel levels will be maintained.

•If you bring the master fader all the way down and release the mouse buton, all the channel faders will reset to –60 dB.

Figure 4.12 All Outputs Volume Controls Window

page 32 Operation Manual