Cub Cadet HB425 WARNING:, WARNING:, KNOW YOUR UNIT, ASSEMBLY INSTRUCTIONS, APPLICATIONS, ASSEMBLING UNIT, Installing Nozzle, Removing the Nozzle, Installing Blower Tube

KNOW YOUR UNIT		ASSEMBLY INSTRUCTIONS

APPLICATIONS
Cleaning yards, garages, driveways,	Throttle Control
porches, patios, around walls,
fences and more
	On/Off Stop Control
	Cruise Control
	Spark Plug

Blower Tube

Muffler

Cover

Handle

Air Filter Cover

Starter

Rope Grip

ASSEMBLING UNIT

WARNING: To avoid serious personal injury and damage to the unit, shut the unit off before removing or installing the blower tubes.

WARNING: To prevent serious personal injury or damage to the unit, the blower tube must be installed while operating this unit.

Installing Blower Tube

1.Align the bump on the end of the blower tube with the bump slot on the bottom end of the blower outlet (Fig. 1).

2.Insert the bump on the blower tube into the bump slot on the blower outlet (Fig. 1).

3.Twist the blower tube clockwise inside the blower outlet until the bump locks into place (Fig. 2).

Primer Bulb

Concentrator	Fuel Cap
Nozzle

Installing Nozzle

1.Align the bump on the end of the blower tube with the bump slot on the end of the nozzle (Fig. 3).

2.Insert the bump on the blower tube into the bump slot on the nozzle (Fig. 3).

3.Twist the nozzle clockwise over the blower tube until tight (Fig. 4).

Removing the Blower Tube

1.Hold the unit firmly.

2.Insert a flathead screwdriver into the tube lock and twist the screwdriver counterclockwise 1/4 turn and hold it there (Fig. 5).

3.While holding the screwdriver in a counterclockwise position, grasp the blower tube and twist it counterclockwise (Fig. 5).

4.Pull the blower tube from the blower outlet.

Removing the Nozzle

1.Hold the blower tube firmly.

2.Grasp the nozzle and twist it counterclockwise until the nozzle unlocks from the blower tube (Fig. 6).

3.Remove the nozzle from the blower tube.