USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER OFF. Replace the cover and measured pour lid and continue blending, if necessary. Make sure spatula is not inside the blender jar before blending.

10.WHEN FINISHED BLENDING: Press the OFF button position and unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not twist locking ring from blender jar when removing jar from motor base. Simply lift blender jar from motor base. Do not place hands into blender jar with blender plugged in.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® SmartPower Premier Duet

600-Watt Blender/Food Processor from the electrical outlet before cleaning. The blender is made of corrosion-resistant parts which are easy to clean. Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. If any part is damaged or blender jar is chipped or cracked, DO NOT USE BLENDER.

Remove the blender jar from the motor base by lifting straight up and away. Twist off the locking ring by turning counterclockwise.

Remove the cutting assembly and rubber gasket. Wash in warm soapy water, rinse, and dry thoroughly.

Place the locking ring in the upper rack of the dishwasher or wash in warm water.

CAUTION: Handle the cutting assembly carefully. It is SHARP and may cause injury. Do not attempt to remove blades from cutting assembly.

Remove the blender jar cover and the measured pour lid. Wash in warm, soapy water; rinse and dry thoroughly, or place in upper rack of dishwasher. The blender jar must be washed in warm, soapy water and rinsed and dried thoroughly. The blender jar can also be placed upside down in dishwasher.

Finally, wipe the motor base clean with a damp cloth to remove any residue, and dry thoroughly. Never submerge the motor base in water or other liquid, or place in a dishwasher.

Tip: You may wish to clean your blender cutting assembly as

follows: Squirt a small amount of dishwashing liquid into assembled blender jar and fill halfway with warm water. Run on LOW for 15 seconds. Repeat, using clean tap water. Empty blender jar and carefully disassemble parts. Wash cutting assembly, gasket and locking ring in warm, soapy water. Rinse and dry all parts thoroughly.

DOs and DON’Ts WHEN USING

THE BLENDER

Do:

Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the blender motor base.

Always use the blender on a clean, sturdy and dry surface.

Always add liquid ingredients to the blender jar first, then add remaining ingredients. This will ensure that ingredients are uniformly mixed.

Cut most foods into approximately 1/2 inch (1.25 cm) to 1 inch (2.5 cm) cubes to achieve a more uniform result. Cut all cheeses into pieces no larger than 1/2 inch (1.25 cm).

Use the measured pour lid to measure liquid ingredients such as alcohol. Replace measured pour lid after ingredients have been added.

Use a rubber or plastic spatula as needed, only when the blender is turned off. Never use metal utensils, as damage may occur to the blender jar or cutting assembly.

Place cover on firmly. Always operate the blender with the cover on.

Make sure locking ring is tightly attached to blender jar.

Always remove locking ring, cutting assembly, and rubber gasket before cleaning.

When scraping the blender jar with a spatula, remove the food from the sides of the blender jar and place food in the centre of the blender jar, over the cutting assembly.

When chopping fresh herbs, garlic, onion, zest, bread crumbs, nuts, spices, etc., make sure the blender jar and cutting assembly are completely dry.

7

Page 7
Image 7
Cuisinart CBT-500FPC manual Cleaning and Maintenance, Blender

CBT-500FPC specifications

The Cuisinart CBT-500FPC is a high-performance blender designed for both culinary enthusiasts and everyday users. This powerful appliance boasts a strong 500-watt motor, ensuring that it can handle a variety of blending tasks with ease. Whether you're preparing smoothies, soups, sauces, or nut butters, the CBT-500FPC provides reliable and consistent results.

One of the standout features of the Cuisinart CBT-500FPC is its 56-ounce Tritan blending jar. Designed with durability in mind, this BPA-free jar is resistant to impact and can handle both hot and cold ingredients. The jar is also equipped with a pour spout and a comfortable handle, making it easy to serve your blended creations without spills or messes. The lid features a removable measuring cap, which allows you to add ingredients during blending, ensuring you can achieve the perfect consistency.

The blender is designed with a user-friendly interface that includes a variety of speed settings and a pulse function. This versatility allows users to achieve their desired texture, whether they are looking to create a smooth puree or a chunky salsa. The control is intuitive, with clearly labeled buttons that simplify the blending process.

One of the remarkable technologies integrated into the Cuisinart CBT-500FPC is the stainless steel double blade design. These blades are engineered for superior cutting and blending performance, allowing for efficient ice crushing and blending of tough ingredients. The blades' sharpness and orientation work together to create a vortex that ensures even blending, reducing the need for manual scraping.

In addition to its blending prowess, the Cuisinart CBT-500FPC is easy to clean. The blending jar and lid are dishwasher safe, making post-preparation cleanup a breeze. The base of the blender features a non-slip grip, keeping it stable on the countertop during use, further enhancing safety.

The design of the CBT-500FPC is sleek and modern, fitting seamlessly into any kitchen aesthetic. With its combination of performance, ease of use, and stylish appearance, the Cuisinart CBT-500FPC is a standout choice for anyone looking to upgrade their blending experience. It embodies everything a contemporary kitchen appliance should be, making it a worthwhile investment for culinary enthusiasts and casual cooks alike.