10Installing the VoIP Intercom Intercom Setup
2.2.4 Call Button and Indicator Light
2.2.4.1 Initial Power
Upon initial power or reset, you will see the following:
•The light is on.
•The light will blink twice to indicate that the intercom has acquired its network settings and is operational.
•The first blink indicates that the intercom has acquired its network settings.
•The second blink indicates that the intercom is operational.
2.2.4.2 Calling
●You may initiate a call by pressing the Call button.
●An active call is indicated by the light blinking at one second intervals.
●The intercom will automatically answer an incoming call.
●You can press the Call button to terminate an active call whether the call was an incoming call or a call that was initiated by you.
Figure 2-8. Call Button and Indicator Light
Call button and indicator light
CyberData Corporation | 930181B | Operations Guide |