Installing the VoIP Intercom 25
Upgrade the Firmware and Reboot the Intercom
8.Enter the firmware filename of the file to be uploaded into the New Filename parameter field. For example, kernel filename
Note This starts the upload process. Once the Intercom has uploaded the file, the Uploading Firmware countdown page appears, indicating that the firmware is being written to flash. The Intercom will automatically reboot when the upload is complete. When the countdown finishes, the Firmware Upgrade page will refresh. The uploaded firmware filename should be displayed in the system configuration (indicating successful upload and reboot).
10.Repeat steps 8 and 9 if you are uploading the Kernel and Application files. For example, Application filename
Table
|
| Table | |
|
|
|
|
| Web Page Item |
| Description |
|
|
|
|
| System Configuration |
| Shows the current configuration. |
|
|
|
|
| BootLoader |
| Shows the current boot loader filename. |
|
|
|
|
| Firmware |
| Shows the firmware for partition 1 and 2. |
|
|
|
|
| TFTP Server IP |
| Enter the TFTP Server IP address. |
|
|
|
|
| New Filename |
| Use this field to enter the new file name for the kernel or |
|
|
| application firmware file that you are uploading. |
|
|
|
|
|
|
| Click on this button to automatically upload the selected |
|
|
| firmware and reboot the system. |
|
|
|
|
|
|
| Link to the Network Setup page. |
|
|
|
|
|
|
| Link to the Intercom Setup page. |
|
|
|
|
|
|
| Link to go to the SIP Setup page. |
|
|
|
|
|
|
| Link to the Home page. |
|
|
|
|
|
|
| Click on this button to reboot the system. |
|
|
|
|
|
|
|
|
2.4.1 Reboot the Intercom
To reboot a Intercom, log in to the web page as instructed in Section 2.3.1, "Log in to the
1. Click Upgrade Firmware to open the Firmware Upgrade page (FigureOperations Guide | 930181B | CyberData Corporation |