Installing the VoIP Intercom 19
| Configure the Intercom Parameters |
| Table |
|
|
Web Page Item | Description |
|
|
Subnet Mask | Enter the Subnet Mask address. |
|
|
Default Gateway | Enter the Default Gateway address. |
|
|
DNS Server 1* | Enter the DNS Server 1 address. |
|
|
DNS Server 2* | Enter the DNS Server 2 address. |
|
|
| Click this button to save your configuration settings. Changing a |
| parameter that has an asterisk next to it will cause a system reboot |
| when saved. |
|
|
| Link to the Intercom Setup page. |
|
|
| Link to the SIP Setup page. |
|
|
| Link to the Upgrade Firmware page. |
|
|
| Link to the Home page. |
3.After changing the parameters, click Save Settings. This updates the changed parameters and reboots the Intercom if appropriate.
4.Connect the Intercom to the target network.5.From a system on the same network as the Intercom, open a browser with the new IP address of the Intercom.
Operations Guide | 930181B | CyberData Corporation |