CyberData VoIP Intercom 2.3.2Configure the Network Parameters, Figure 2-14.Network Setup Page, Table 2-6.Network Setup Parameters, Table 2-5.Home Page Overview (continued)

18 Installing the VoIP Intercom

Configure the Intercom Parameters

	Table 2-5. Home Page Overview (continued)
Web Page Item	Description
	Link to the SIP Setup web page.
	Link to the Upgrade Firmware web page.

2.3.2Configure the Network Parameters

1.Click the Network Setup button to open the Network Setup page (Figure 2-14).

Figure 2-14. Network Setup Page

2. On the Network Setup page, enter values for the parameters indicated in Table 2-6.

		Table 2-6. Network Setup Parameters
	Web Page Item	Description
	IP Addressing*	Select either DHCP IP Addressing or Static IP Addressing by
		marking the appropriate radio button. If you select Static, configure
		the remaining parameters indicated in Table 2-6. If you select DHCP,
		go to Step 3.
	IP Address*	Enter the Static IP address.
CyberData Corporation		930181B	Operations Guide