16Installing the VoIP Intercom Configure the Intercom Parameters

2.3 Configure the Intercom Parameters

To configure the Intercom online, use a standard web browser.

Configure each Intercom and verify its operation before you mount it. When you are ready to mount an Intercom, refer to Chapter A, “Mounting the Intercom” for instructions.

All Intercoms are initially configured with the following default IP settings:

When configuring more than one Intercom, attach the Intercoms to the network and configure one at a time to avoid IP address conflicts.

 

Table 2-4. Factory Default Settings

 

 

Parameter

Factory Default Setting

 

 

IP Addressing

static

 

 

IP Address

192.168.3.10

 

 

Web Access Username

admin

 

 

Web Access Password

admin

 

 

Subnet Mask

255.255.255.0

 

 

Default Gateway

192.168.3.1

 

 

2.3.1Log in to the Configuration Home Page

1.Open your browser to the Intercom IP address.

For the initial configuration of the Intercom, open your browser to the default IP address: http://192.168.3.10

Note Make sure that the PC is on the same IP network as the Intercom.

2.When prompted, use the following default Web Access Username and Web Access Password to access the Home Page (Figure 2-13):

Web Access Username: admin

Web Access Password: admin

CyberData Corporation

930181B

Operations Guide