Cypress CY7C1012DV33 manual Maximum Ratings, Operating Range, Range Ambient

CY7C1012DV33

Maximum Ratings

Exceeding maximum ratings may impair the useful life of the device. These user guidelines are not tested.

Storage Temperature	–65°C to +150°C
Ambient Temperature with
Power Applied	–55°C to +125°C

Supply Voltage on VCC Relative to GND [2]....–0.5V to +4.6V

DC Voltage Applied to Outputs
in High-Z State [2]	–0.5V to V	CC	+ 0.5V
DC Input Voltage [2]
	–0.5V to V	CC	+ 0.5V

Current into Outputs (LOW)	20 mA
Static Discharge Voltage	>2001V
(MIL-STD-883, Method 3015)
Latch Up Current	>200 mA

Operating Range

Range	Ambient	VCC
	Temperature
Industrial	–40°C to +85°C	3.3V ± 0.3V

DC Electrical Characteristics Over the Operating Range

Parameter	Description	Test Conditions			[3]		–10		Unit
						Min		Max
VOH	Output HIGH Voltage	VCC = Min, IOH = –4.0 mA				2.4			V
VOL	Output LOW Voltage	VCC = Min, IOL = 8.0 mA						0.4	V
VIH	Input HIGH Voltage					2.0		VCC + 0.3	V
VIL[2]	Input LOW Voltage					–0.3		0.8	V
IIX	Input Leakage Current	GND < VI < VCC				–1		+1	μA
IOZ	Output Leakage Current	GND < VOUT < VCC, output disabled				–1		+1	μA
ICC	VCC Operating Supply	VCC = Max, f = fMAX			= 1/tRC			175	mA
	Current	IOUT = 0 mA CMOS levels
ISB1	Automatic CE Power Down	Max VCC,		> VIH				30	mA
			CE
	Current —TTL Inputs	VIN > VIH or VIN < VIL, f = fMAX
ISB2	Automatic CE Power Down	Max VCC,		> VCC	– 0.3V,			25	mA
			CE
	Current —CMOS Inputs	VIN > VCC – 0.3V, or VIN < 0.3V, f = 0

Notes

2.VIL (min) = –2.0V and VIH(max) = VCC + 2V for pulse durations of less than 20 ns.

3.CE indicates a combination of all three chip enables. When active LOW, CE indicates the CE1 or CE2 , or CE3 is LOW. When HIGH, CE indicates the CE1 , CE2 , and CE3 are HIGH.

Document Number: 38-05610 Rev. *D Page 3 of 11

[+] Feedback