
Section 3 - Configuration
Wi-Fi Protected Setup (WPS)
Enable: Enable/dsiable the
Lock
Setup: |
|
| |
PIN Settings: A PIN is a unique number that can be used to add the |
|
router to an existing network or to create a new network. |
|
Only the Administrator (“admin”account) can change or |
|
reset the PIN. |
|
Current PIN: Shows the current PIN. |
|
Reset PIN to Restore the default PIN of the router. |
|
Default: |
|
Generate New Create a random number that is a valid PIN. This becomes |
|
PIN: the router’s PIN. You can then copy this PIN to the user |
|
interface of the wireless client. |
|
This Wizard helps you add wireless devices to the wireless |
|
network. |
|
Add Wireless Starts a wizard which will display the wireless network settings to guide you through manual configuration, prompt you to enter the Station: PIN for the device, or ask you to press the configuration button on the device. If the device supports
within 120 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special
Note: You may also press the physical WPS button on the device.
96 |