D-Link AC1600 user manual Internet Setup, Address

Section 3 - Configuration

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses an L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

My Internet Select L2TP (Username/Password) from the drop-

Connection: down menu.

Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. L2TP usual requires a Dynamic IP con- figuration.

L2TP IP Address: Enter the L2TP IP address used here. This option is only available if Static IP is selected.

L2TP Subnet Mask: Enter the L2TP Subnet Mask used here.

L2TP Gateway IP Enter the L2TP Gateway IP address used here.

Address:

L2TP Server IP Enter the L2TP Server IP address used here. This is Address: normally the same a the L2TP Gateway IP address.

Username: Enter the L2TP username used here. Password: Enter the L2TP password used here.

Verify Password: Re-enter the L2TP password used here. Reconnect Mode: Use the radio buttons to specify the reconnect

mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later.

D-Link DIR-862L User Manual 39