Section 3 - Configuration
Tools
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
Admin Password:
User Password:
Gateway name:
Enable Graphical Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
Enter a new password for the Administrator Login Name. The administrator can make changes to the settings.
Enter the new password for the User login. If you login as the User, you cannot |
|
change the settings (you can only view them). |
|
| |
Enter a name for your router. |
|
Enables a |
|
from a distorted image displayed on the screen to prevent online hackers and |
|
unauthorized users from gaining access to your router’s network settings. |
|
Check to enable HTTPS to connect to the router securely. This means to connect |
|
to the router, you must enter https://192.168.0.1 (for example) instead of |
|
http://192.168.0.1. |
|
Remote management allows the |
|
by a web browser. A username/password is still required to access the Web |
|
Management interface. |
|
The port number used to access the |
|
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the |
|
8080 is the port used for the Web Management interface. |
|
If you have enabled HTTPS Server, you must enter https:// as part of the URL to |
|
access the router remotely. |
|
This section will list any rules that are created. You may click the Edit icon to |
|
change the settings or enable/disable the rule, or click the Delete icon to remove |
|
the rule. Details will display the current status. |
|
101 |
