10/100 Auto Negotiation Switch User’s Guide
DES-3224 LED Panel
The LED panel of the
10Mbps Link Power Act
100 Mbps | Full | Half | Utilization |
Figure 5: DES-3224 LED Panel
Speed/ Link/ Activity LED
The 10/100 Mbps, Link, and Activity are combined into one LED. See Table 5:
All ports auto negotiate the proper speed and duplex mode when a cable is plugged in. The 10 Mbps/ 100 Mbps LED indicates the speed the port is working at. The LED is amber when the port is at 10 Mbps. The LED is green when the port is at 100 Mbps.
The Link LED indicates that there is a link at the port. If a cable is plugged into the port and the link LED is off, check the connection.
The Act (Activity) LED indicates that there is transmission (Tx) or reception (Rx) on the port. The LED flashes amber when the port is transmitting or receiving data at 10 Mbps. The LED flashes green when the port is transmitting or receiving data at 100 Mbps.
Table 5:
Status | Color | Meaning |
|
|
|
On | Flashing Amber | Port speed is 10 Mbps, link is up and data is passing |
|
| through the port. |
|
|
|
On | Flashing Green | Port speed is at 100 Mbps, link is up and data is passing |
|
| through the port. |
|
|
|
Off | Dark | No link at this port. |
|
|
|
Full/ Half LED
The Full/Half LED indicates the duplex mode of the port. Full duplex means that data is being transmitted and received at the same time. Half duplex means that data is only being transmitted or received in one direction at a time. See Table 6:
LEDs | 13 |
