D-Link manual DES-3224 Technical Specifications, Switch Specifications, Port Specifications

10/100 Auto Negotiation Switch User’s Guide

A

DES-3224 Technical Specifications

Switch Specifications

∙Complies with IEEE 802.3 CSMA/CD 10 Base-T, 100 Base-TX

∙Complies with IEEE 802.1d Spanning Tree

∙Switched IEEE 802.3 MAC layer frame size: 64-1518

∙NWAY Auto-negotiation for each 10 Base-T/ 100 Base-TX network port providing auto-detection of connected cable type, auto-sensing of full and half duplex signaling and auto-configuration

∙Cut-Through and Store-and-Forward switching for reliable error-free packet transfers

∙Native SNMP management support with Ethernet MIB II (RFC 1213), RMON MIB (RFC 1757) and bridge MIB (RFC 1493)

∙8,192 maximum entries for MAC address Table

∙Comprehensive LED indicators display of the system/ port status

∙512KB EEPROM (flash memory) for firmware upgrade

∙RS-232 (DB-9) port for Out-of-Band management (asynchronous, 8-bit data, 1 stop bit, no parity, 19.2 K baud)

∙Rack mountable (Fits standard 1.5 U EIA 19” rack)

∙Includes 24 10/100 Mbps Ethernet ports with built-in support of RMON and VLAN

∙Supports Trunking Group

Port Specifications

∙24 RJ-45 ports for Cat 3, 4, or 5 UTP cable (Cat. 5 req. for 100 Base-TX)

∙1 MDI-II Uplink port, shared with port 1, use straight cable when connecting to this port

∙10 or 100 Mbps data transfer rate

∙NWAY Auto-negotiation

∙Full or Half Duplex

DES-3224 Technical Specifications 61