D-Link manual Appendix a DES-5016 Technical Specifications, Switch Specifications

Fast Ethernet Switching System User’s Guide

Appendix A

DES-5016 Technical Specifications

Switch Specifications

∙Complies with IEEE 802.3 CSMA/CD 10/100-TX, 100BASE-FX and 1000BASE-SX

∙Complies with IEEE 802.1d Spanning Tree

∙Switched IEEE 802.3 MAC layer frame size: 64-1518

∙NWAY Auto-negotiation for each 10/100-TX network port providing auto- detection of connected cable type, auto-sensing of full and half duplex signaling and auto-configuration

∙Cut-Through and Store-and-Forward switching for reliable error-free packet transfers

∙Native SNMP management support with Ethernet MIB II (RFC 1213) and bridge MIB (RFC 1493), RMON MIB (RFC-1757)

∙8,192 maximum entries for MAC address Table

∙Comprehensive LED indicators display of the system/ port status

∙512KB EEPROM (flash memory) for firmware upgrade

∙RS-232 (DB-9) port for Out-of-Band management (asynchronous, 8-bit data, 1 stop bit, no parity, 19.2 K baud)

∙Rack mountable (Fits standard 2.5 U EIA 19” rack)

∙8 port 10/100-TX module with built-in support of RMON and VLAN

∙Supports Trunking Group

∙Eight port fiber optic (FX) module with built-in support of RMON and VLAN

∙Two port fiber optic (FX) expansion module with built-in support of RMON and

VLAN

∙One port gigabit (SX) expansion module with built-in support of RMON and

VLAN

Port Specifications

∙RJ-45 ports for Cat 3, 4, and 5 UTP cable (Cat. 5 req. for 10/100-TX)

∙10, 100, 1000 Mbps data transfer rate

∙NWAY Auto-negotiation for all 10/100-TX ports

Appendix A 82