Manuals / D-Link / Computer Equipment / Switch

D-Link DES-5016 manual MDI-X Ports, Fiber Optic Ports, RS-232 Port

Models: DES-5016

1 96

Download 96 pages 24.59 Kb

Page 29

Ports

Fast Ethernet Switching System User’s Guide

Ports

MDI-X Ports

The ports in the 8-Port 10/100-TX module are MDI-X crossover ports. The pin arrangement is the same as the arrangement in a crossover cable. The advantage of MDI- X ports is that you can connect a device with an MDI-II port without using a crossover cable. The steps for connecting the DES-5016 to 10 Mbps devices or 100 Mbps devices are the same. All the ports will auto negotiate the proper speed and duplex mode. The DES-5016 has two full sized modules with eight ports each and one half size optional module.

Fiber Optic Ports

The DES-5016 supports 100BASE-FX and 1000BASE-SX. The chassis supports a maximum of 18 100BASE-FX ports. The 100BASE-FX ports support full and half duplex at 100 Mbps. The ports do not support 10 Mbps.

A 1-Port 1000BASE-SX optional module is available. The 1-Port 1000BASE-SX optional module only supports full duplex at 1000 Mbps. Contact sales at D-Link, Inc. to purchase either of the optional modules.

Refer to Installing Optional Modules, for installation instructions. Refer to Cable Specifications, for information on cable types and connectors.

Follow these steps to connect cables to the DES-5016:

Check for the appropriate cable configuration for each device.

1.Plug one end of the cable into any of the ports.

2.Plug the other end into the appropriate port on the other device.

3.Verify that the LED indicates connection at the proper speed and duplex mode.

RS-232 Port

Follow these steps to connect the DES-5016 and another device:

1.Plug one end of the cable provided into the port.

2.Plug the other end into the PC.

3.Run HyperTerminal or a terminal emulation program using the settings given for Local Console Management at the beginning of Chapter 5, Managing the DES-5016.

Connecting the DES-5016 to the Network

21

Image 29

D-Link DES-5016 manual MDI-X Ports, Fiber Optic Ports, RS-232 Port

Contents

Rev. 01 January 651DES32.K15 DES-5016 Fast Ethernet Switching System User’s GuideCopyright 1999 by D-Link Systems, Inc. All rights reserved D-Link Limited Warranty HardwareSoftware In North, Central, and South America D-Link Offices for Registration and Warranty ServiceIn Europe and Israel In the Middle East except Israel, Asia, Oceania and AfricaCE Mark Warning Copyright StatementFCC Warning Wichtige Sicherheitshinweise Table of Contents System Configuration Connecting the DES-5016 to other Switches and HubsSwitch Port 1-8, 9-16 and Optional Module Configuration 100BASE-FX/ 1000BASE-SX Switch Port ModuleSwitch Port Configuration Change PasswordSwitch Port Configuration Menu Spanning Tree ConfigurationOrganization About This GuideAudience Introduction Features∙ Supports Full and Half Duplex for both 10 Mbps and 100 Mbps Fast Ethernet Switching System User’s Guide∙ The DES-5016 supports SNMP for RFC 1213, RFC 1757, and RFC ∙ VLAN support for eight broadcast domainsDES-5016TX Front PanelFigure 3 DES-5016FX DES-5016TFFigure 2 DES-5016TF Figure 4 DES-5016 Rear Panel Rear PanelUpdating Firmware Management MethodsLocal Console Management Telnet ManagementUnpacking the DES-5016 Installing the DES-5016Installation Options Figure 5 Install Feet on Bottom Desktop/ Shelf InstallationFigure 6 Attach Feet Fast Ethernet Switching System User’s GuideInstalling the DES-5016 Figure 7 Attach Mounting Brackets Rack InstallationFigure 8 Insert into Rack Fast Ethernet Switching System User’s GuideInstalling the DES-5016 Installing Optional Modules Figure 9 Remove Blank Bracket Fast Ethernet Switching System User’s GuideInstalling the DES-5016 Figure 10 Insert Optional Module Fast Ethernet Switching System User’s GuideInstalling the DES-5016 Power On Copper Cable Connecting the DES-5016 to the NetworkCable Specifications Connecting the DES-5016 to the Network Fast Ethernet Switching System User’s GuideTable 1 Cable Specifications for Copper Connection Figure 11 Cable DiagramFiber Optic Cable MDI-X Ports PortsFiber Optic Ports RS-232 PortDES-5016 to DES-5016 Connection Connecting the DES-5016 to other Switches and HubsFigure 12 DES-5016TF LEDs LEDsDiagnostic PowerCPU Module StatusDark Table 3 CPU Module LEDsLit or Flashing Link 8-Port TX Module100/10 Full/ HalfDark Table 4 8-Port TX Module LEDsLit or Flashing Link/ Act 8-Port FX ModuleLit or Flashing Dark2-Port 100BASE-FX Module LEDs Fast Ethernet Switching System User’s GuideTable 6 FX Module LED DarkLink 1-Port 1000BASE-SX ModuleFigure 17 1-Port 1000BASE-SX Module Table 7 Gigabit Module LEDManaging the DES-5016 ∙ Data bits ∙ Parity None ∙ Stop bits ∙ Flow Control None ∙ User Name D-Link ∙ Default Password D-LinkLocal Console Management Telnet Log In ∙ Default User Name D-Link ∙ Default Password D-LinkFigure 19 Help Message Help MessagePanel Conventions Switch Port 1-8, 9-16 and Optional Module Configuration System Configuration100BASE-FX/ 1000BASE-SX Switch Port Module Console ProgramSNMP Management Configuration Spanning Tree ConfigurationVLAN Port Management Trunking Port ManagementSystem Reset System Configuration MenuFactory Reset to Default Config Values System InformationBoot PROM Firmware Version Software UpdateSystem Information Menu Hardware RevisionMAC Address LAN Default GatewaySystem Description System NameFigure 23 System Reset System ResetFigure 24 Factory Reset Factory ResetFigure 25 Factory Reset Confirmation Fast Ethernet Switching System User’s Guide1. Select No or Exit 2. Press Enter Managing the DES-5016Disadvantages of Store and Forward System Rate ControlAdvantages of Store and Forward Disadvantages of Cut-Through Advantages of Cut-ThroughFigure 27 Software Update menu Software Update MenuFigure 28 Transfer Firmware Figure 29 Send File Fast Ethernet Switching System User’s GuideManaging the DES-5016 Managing the DES-5016 Fast Ethernet Switching System User’s GuideFigure 30 Xmodem Figure 31 EEPROMUser Account Change Menu User Account ManagementConfirm Password PasswordAccess Level Create New User2. Enter the Password Fast Ethernet Switching System User’s Guide3. Reenter the password in the Confirm Password field 4. Toggle the space bar to set the access level of the new userStatus Delete UsersDelete Access Level2. Toggle the space bar to change the current Access Level Fast Ethernet Switching System User’s Guide1. Select the Access Level of the user you want to delete 3. Select Save and press EnterOld Password Change PasswordNew Password Confirm PasswordManaging the DES-5016 Fast Ethernet Switching System User’s Guide5. Select Save and press Enter to save your changes Switch Port Configuration Physical Switch Port Configuration MenuState Flow Control Port StatePriority STA Operation Levels Spanning Tree ConfigurationSpanning Tree Configuration Menu Spanning Tree Algorithm Forward Delay TimeBridge Priority Root CostTable 8 User Selective STA Parameters Root BridgeRoot Port SNMP Management Configuration SNMP Manager Setting SNMP Management Configuration MenuAccess Right SNMP Community StringAuthentication Failure SNMP Trap Manager SettingCold Start Link Change EventFollow these steps to configure the SNMP Trap Manager Setting Fast Ethernet Switching System User’s Guide4. Select Save and press Enter 1. Enter the IP Address of the Trap ManagerVLAN Port Management Figure 39 VLAN Port Management menu VLAN Port Management MenuNew VLAN Name Create New VLANPort # TrunkGroupFollow these steps to create a VLAN Fast Ethernet Switching System User’s Guide1. Enter the name of the VLAN you are creating 3. Select Save and press EnterVLAN Name Delete VLAN MenuDelete Figure 41 Delete VLAN menuFigure 42 Modify VLAN menu Modify VLAN MenuVirtual LAN Name Figure 43 Trunking Port Management menu Trunking Port Management MenuNew Trunking Group Name Create New Trunking PortName Port #Follow these steps to create a TrunkGroup Fast Ethernet Switching System User’s Guide1. Enter the name of the TrunkGroup 3. Select Save and press EnterTrunking Port Delete Trunking PortModify Trunking Port DeleteFigure 46 Modify Trunking Port Trunking Port NameProblem TroubleshootingSolution POST ErrorsTroubleshooting Fast Ethernet Switching System User’s GuideTable 9 Diagnostic LED Fast Ethernet Switching System User’s GuideTroubleshooting Port Specifications Appendix A DES-5016 Technical SpecificationsSwitch Specifications Appendix A Fast Ethernet Switching System User’s Guide∙ Full or Half Duplex for all 10/100-TX ports Appendix A Fast Ethernet Switching System User’s GuideGeneral Appendix A Fast Ethernet Switching System User’s GuidePhysical and Environmental Transmission Index