Frequently Asked Questions |
Q: How can I set my computer to use a static IP address?
A:If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
1.Windows® XP: Click on Start > Control Panel > Network Connections.
Windows® 2000: From the desktop,
2.
3.Highlight Internet Protocol (TCP/IP) and click Properties.
4.Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your Adapter.
Example: If the Adapter’s LAN IP address is 192.168.1.150, make your IP address 192.168.1.x where x is a number between 1 and 254 but except (192.168.1.1 for example). Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your
5.Click OK twice to save your settings.
Q:I get a dial tone, but when I dial any phone number I receive a busy signal.
A:The unit may not have been properly configured with the correct account information in the
1.Access the
2.Select the Setup tab and click the SIP Account List submenu.
3.Enter the account information provided by your VoIP service provider, including Display Name, User Name, Authentication Name, Password, Proxy Server (if applicable), Outbound Proxy Server (if applicable), etc.
Q: After setting up the
A:Make sure that the Ethernet cable from the PC is plugged into the LAN port of broadband modem or router after you finish the configuration of the
Q: Can I use my DVG-2101S on a MGCP network?
A:No,
54
