Configuration, Enter or Return key | D-Link DVG-2101S instruction

Configuration

DVG-2101S User Manual

Configuration

Prior to using your web browser for accessing the web-based configuration utility, if DHCP is not enabled on your computer, be sure to assign a static IP address to the VoIP Telephone Adapter.

Use the computer that was last connected directly to your Cable/DSL modem. Right-click My Network Places > select Properties > right-click Local Area Connection > select Properties > double-click Internet Protocol (TCP/IP).

Set your PC’s IP address to 192.168.1.1 and the subnet mask to 255.255.255.0. The default gateway and primary DNS server IP addresses should be the LAN IP address of the DVG-2101S (192.168.1.150).

Click OK.

In order to use a web browser to configure the VoIP Adapter you must make sure it has a valid Ethernet connection to a PC or LAN via its LAN port. Access the configuration utility to check the LAN port by entering the IP Address into your web browser address field.

Open a web browser and type

http://192.168.1.150 into the

URL address box. Press the

Enter or Return key.

When you first log in, enter the Username admin and leave the Password blank.

These may be changed later.

Click the Login button.

9

Image 11

D-Link DVG-2101S user manual Configuration, Enter or Return key

Contents

DVG-2101S VoIP Telephone Adapter Table of Contents Introduction Package Contents „ NTP Features „ VPN Register LED Power LEDFront Panel Phone LED Rear Panel Reset Button Connecting the DVG-2101S Directly to a Modem Hardware Installation Connecting the DVG-2101S Behind a Router Hardware Installation Enter or Return key Configuration Step Click Setup Wizard Static IP users have to set the DNS address Click Next Step Dynamic IP SetupInternet Setup Connection Type Static IP PPPoE PasswordService Name Name Clone MAC Address Clone Static Routing SIP Account List VoIP Setup Number Phone Book Time and Date Internet Time Zone Enable Daylight Saving Dates Advanced VoIP SettingsCall Feature Scenario Examples of Making a Conference Call SIP Setting Digit Plan Component Description Digit Plan Syntex To specify a Enter the following Result IVR Digits Input Scenario Rule Combination VoIP Adapter will do… Digit Map Example PrefixMode Min Len Dial Prefix Packetization CodecPriority Codec Phone Setting DNS Server Address Host Name Username or Key Timeout StatusDynamic DNS QoS VPN Dialing out Settings LAN Mask System MaintenanceConfiguration Times Period File Auto Provision Snmp for Snmp model only Log Setting Firmware Update Admin Current Password Admin New Access Control Ping Test Device Information Status VoIP Status CDR Status VPN Status Network Status System Log Help Menu Help Configuration through IVR Why can’t I access the web-based configuration utility? Frequently Asked Questions How can I check if my IP address is correct for logging in? What can I do if I forgot my password? Can I use my DVG-2101S on a Mgcp network? How can I set my computer to use a static IP address? Technical Specifications FCC Caution FCC EMI Statement