Setup |
VoIP Setup
The VoIP (Voice over Internet Protocol) Adapter can be configured to handle voice communication over the Internet. The screen shown below, along with the SIP account list and phone book pages are used to configure the basic settings to allow you to communicate with the devices that will send and receive telephone calls over the Internet.
SIP Account List
The VoIP Adapter allows you to make calls through the Internet or PSTN. You need to configure the SIP account before you can make a VoIP phone call.
Display Name Enter your display name. Every outgoing call will carry this name to the receiver and it should appear on the
User Name Enter your SIP account username. The username is the part that comes before the “@” symbol. A username can be letters like in an
Authorization | Enter the authorization name to authenticate your SIP account. |
Name | This is usually the same to your SIP account’s user name. |
Password | Enter the password to authenticate your SIP account. |
Proxy Server | Enter the SIP proxy server’s IP address and port number in this |
| field (e.g. 192.168.0.253:5060). |
Outbound | Enter the outbound proxy server IP address and port number in |
Proxy Server | this field (e.g. 192.168.0.1:5060). |
Expire Time | Enter the amount of time for the dial tone when the phone has |
| been lifted off the hook. At the end of this time period, if no |
| numbers have been dialed, the device will start playing the |
| busy tone. |
MWI | Check the checkbox to activate MWI (Message Waiting |
| Indication) if the SIP server supports this service. |
18
