D-Link DWL-650+ manual Getting Started, Setting Up an Infrastructure Network

Getting Started

Setting Up an Infrastructure Network

DWL-650+

Fig. 4.1

Please remember that D-Link AirPlus wireless devices are pre-configured to

connect together, right out of the box, with the default settings.

You will need a broadband Internet access (Cable/DSL) subscription.

Consult with your Cable/DSL provider for proper installation of the modem.

Connect the modem to a wireless Broadband router (such as the

D-LinkDI-713P.)See the Quick Installation Guide included with the

router.

If an Ethernet port is available on the router, connect a computer that is equipped with an Ethernet Network adapter (such as the DFE-530TX+) to the router.

Install the drivers for the wireless network adapter (such as the D-LinkAirPlus DWL-650+) into the laptop computer. See the

Quick Installation Guide included with the DWL-650+.

Please refer to the following sections of this manual for additional information about setting up a network:

Networking Basics- learn how to check your IP Address; share printers and files.

Using the Configuration Utility- learn the settings you must use on each computer in your network for successful communication.

Troubleshooting – learn how to check for the proper installation of the network adapters’ drivers and other tips for troubleshooting the network.

10