D-Link DWL-650+ manual Configuration Utility, same settings for the following properties

Models: DWL-650+

1 62
Download 62 pages 34.82 Kb
Page 17
Image 17
Configuration

Configuration Utility

Configuration

D-Link AirPlus DWL-650+ 2.4GHz Wireless Cardbus Adapter

default

This Configuration screen displays the default settings for the DWL-650+.

Fig. 6.4

To communicate on the network all devices must have the

same settings for the following properties:

SSID - (Service Set Identifier) is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default.

Wireless Mode - Click on the pull-down menu; select from the following options:

Infrastructure - connecting the WLAN using an Access Point such as the DWL-1000AP. (The default setting.)

Ad-Hocwireless mode used when connecting directly to a computer equipped with a wireless adapter such as the D-Link AirPlus DWL-520 Wireless PCI adapter in a peer-to-peer environment.

Channel – The default channel setting is channel 6. However, the DWL-650+ will automatically select the channel to match the channel setting for the selected Access Point. In Ad Hoc mode, the channel must be manually set to the same channel for each wireless adapter.

TX Rate - Select the transmission rate on the network. 11Mbps is the default setting.

Preamble - Select Long or Short Preamble. The Preamble defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between the Access Point and the roaming wireless Network adapters. Long Preamble is the default setting. Note: High network traffic areas should use the shorter preamble type.

Power Mode – Select from three modes:

Continuous Access Mode-this default setting consumes the most power Maximum Power Save-this setting consumes the least power

Power Save- this setting consumes a moderate amount of power

If any changes are made to the configuration of the wireless adapter, click Apply to save the changes.

17

Page 17
Image 17
D-Link DWL-650+ manual Configuration Utility, To communicate on the network all devices must have the