Daewoo KOG-393R0S, KOG-371H0S, KOG-373R0S, KOG-374R0S NOTE KOG-371G/H, KOG-391G/H, of control box

(TROUBLE 4) The following visual conditions inditions indicate a probable defective touch control circuit or membrane switch assembly

1.Incomplete segments,

1)Segments missing.

2)Partical segments missing.

3)Digit flickering other than normal display slight flickering.

4)" :0" does not display when power is on.

2.A distinct change in the display are not on when they numbers is the display.

3.One or more digits in the display are not on when they should be.

4.Display indicates a number different from one touched.

5.Specific numbers (for example 2 or 3) will not display when the panel is touched.

6.Display does not count down or up with time cooking or clock operation.

7.Oven is programmable and cooks normally but no display shows.

8.Display obviously jumps in time while counting down.

9.Display counts down noticeable too fast while cooking.

10.Display does not show the time of day when dlear pad is touched.

11.Oven lamp and turntable motor do not stop although cooking is finished. Check if the RELAY 2 contacts close if they are close, replace touch control circuit.

CONDITION

Display does

not show

programming at all, even if keyboard is touched.

CHECK

Check rach pad for

continuity of the membrane keyboard for the following keyboard check procedure

RESULT

Normal

Abnormal

CAUSE	REMEDY
	Replace
Malfunction
	control box
of touch
	sub-assembly
control circuit
of control box
sub-assembly
Malfunction	Replace the
of the membrane	membrane
keyboard	keyboard

NOTE (KOG-371G/H, KOG-391G/H)

Before following the particular steps listed above in the trouble shooting guide for the membrane keyboard's, failure, please check for the continuity of each wire-harness between the membrane keyboard and P.C.B. assembly.

48