Datalogic Scanning SR, XLR, HD manual Configurator Express Programming Software

Figure 2. Connecting/Disconnecting the Interface (I/F) Cable

a	b
	c

2.Consult your Host Terminal manual to determine the required communication parameters for the Host Terminal (e.g., baud rate, parity, etc.) and, if necessary, modify the programmed parameters to be compatible with those requirements. Scanner and Base Station programming is performed using one of the following:

-Configurator Express™ Programming Software

-PowerScan® Bar Code Scanner Programming Guide

See References for more information about how to obtain software and manuals for this product.

NOTE

	The Host Terminal manual should also be consulted
	as to whether power must be turned off before con-
	necting peripheral devices. Ensure that the correct
CAUTION	procedure is followed to avoid damage to equip-
	ment or interruption of system functions.

3.Connect the I/F cable to the proper port on the Host Terminal (check your Host Terminal manual to determine hardware requirements).

4.Connect the AC Adapter's power cord at the Base Station and plug the AC/DC adapter in at the wall outlet (see Figure 3).

6 PowerScan® RF Scanner