Datalogic Scanning SR Installing the Battery, To assure maximum usage, batteries should always

Installing the

Battery

To assure maximum usage, batteries should always

be fully charged before their initial use. (See “Bat-

tery Charging and Maintenance” on page 10.)

NOTE

Orient the battery as shown in Figure 1, then push it into the scanner until it snaps in place. To remove the battery, push in on the release tabs on both sides of the battery’s base and pull it straight out of the scan- ner.

Figure 1. Installing the Battery

1 1

1.Battery Release Tabs

4 PowerScan® RF Scanner