Datalogic Scanning XLR, SR, HD Active Symbologies, Duration, Comment, User’s Guide, Indication

LED	DURATION	COMMENT
INDICATION
		When a scanner is nested
	Continuous flashing	in the station, this indicates
		its battery is being quick
		charged.
		When a scanner is nested
Charge	Lit Constantly	in the station, this indicates
		its battery is at or near full
(Battery)
		charge.
		A scanner is not present or
		incorrectly inserted into the
	Not Lit	station. It can also mean
		the battery is below 0°C
		(too cold for charge)
Power	Lit Constantly	Indicates that power is on.

a.The LED remains on while the unit is actively processing code which requires a TX/RX to occur. The duration of the LED is dependent upon the length of the message.

Active Symbologies

The active (enabled) bar code symbologies in the standard factory defaults are:

•Code 39 (C39)

•Code 128 (C128)

•Interleaved 2 of 5 (I 2 of 5)

Your scanner should be pre-programmed with these standard factory

default settings, unless...

...it was shipped to you programmed with unique, customer con- figuration settings.

...you or another user have made changes to scanner program- ming.

User’s Guide 21