Datalogic Scanning SR, XLR, HD Using the PowerScan RF System, Battery Charging and Maintenance

Using the PowerScan RF System

This section covers the following topics:

•Battery Charging and Maintenance

•How to Scan

•LED and Beeper Indications

Battery

Charging and

Maintenance

	When the scanner is in use, a low battery condition
	is indicated by a repeated two-flash signal from the
	scanner’s green LED every time the trigger is pulled
	before the laser is enabled. This indicator may have
NOTE	been disabled via custom programming. See LED
	and Beeper Indications for more information.

Seat the scanner in the Base Station as shown in Figure 4, ensuring that the battery fully engages the station’s metal contacts. The CHARGE LED on the Base Station should flash, indicating the battery is charg- ing.

Figure 4. Charging the Battery

10 PowerScan® RF Scanner