Datalogic Scanning HD, SR, XLR manual not illuminate, Tips for Extending Battery Life, User’s Guide

Rapid flashing indicates that charging is taking place. Rapid charging occurs when the battery temperature is between 10°C (50°F) and 46°C (115°F), and/or voltage of the battery is between 2.0 and 3.2V. Charge time is less than 4.2 hours. Rapid charge ends with the battery at approximately 90 to 95% capacity. The CHARGE LED remains on steady when trickle charging or after the charge cycle is complete.

	A scanner may be charged simultaneously while
	other scanners are in use with the Base Station.
NOTE
	Batteries will not charge if their temperature is
	below 0°C (30°F). If a battery that is too cold is
	inserted into the Base Station, the Charge LED will
NOTE	not illuminate.

Tips for Extending Battery Life

Nickel Metal Hydride (NiMH) batteries will better hold a charge if allowed to discharge at least once a week. The chemical reactions that correspond to charge and discharge in a rechargeable battery should occur to obtain the maximum number of charge/discharge cycles in the battery. If a battery is removed from the scanner and stored, it should be fully charged when stored. Batteries will lose the ability to hold a charge when stored for long periods of time (weeks, months, or longer).

Batteries will typically have about 30% charge capacity when shipped. To assure maximum usage, the battery should be fully charged before use.

Store your battery in a cool dry place. Do not leave your battery exposed to direct sunlight or temperatures below 0°C (30°F) and above 38°C (100°F).

Annual replacement of rechargeable battery packs is recommended, to ensure maximum performance.

NOTE

User’s Guide 11