EURO 25 | 27 |
SERVICING - Continued
REPLACEMENT OF FAN
•Disconnect the power to the appliance.
•Remove the louvers, control cover door, brick panels, logs and burner.
•Remove the firebox lower back. Remove the screws located at the back of the firebox. Take the lower firebox back out. Be careful not to damage the gasket. The fan is now visible.
•Use a 11/32” hex socket and remove the three nuts holding the fan to the back of the firebox. Disconnect the spade connectors to the fan. Carefully remove the fan.
•Reverse the above instructions to install the new fan
VALVE CONNECTIONS
ROBERTSHAW GAS CONTROL VALVE
WIRING DIAGRAM. USED FOR
EURO 25 INSERT.
