Delkin Devices EI - 25-1 manual Firehearth / Monterey Model Firesong 220 Series

EURO 25 -1 34

INSTALLATION INSTRUCTIONS

INSTALLING THE EURO 25-1 GAS FIREPLACE INSERT HEATING APPLIANCE

INTO VENTED ZERO-CLEARANCE GAS FIREPLACE:

FIREHEARTH / MONTEREY MODEL FIRESONG 220 SERIES

CAUTION: Installation must be conducted by a qualified gas appliance installer. Gas and electrical power must be disconnected from the host gas fireplace before installation can begin.

1.Unhook the screen rod at the center and remove screens or glass door.

2.Unscrew and remove the front trim strip at the front of the firebox bottom.

3.Remove the burner/sandpan assembly, valve and pilot assembly from the firebox bottom plate. Leave the plate in place to support the gas insert.

4.Bend the front deflector plate forward and up. Measure the height of the front opening. The opening must be 15 ¼” of higher.

5.The preparation of the host gas fireplace is complete. See Appendix A of the Euro-25-1 manual for further instructions. All installation requirements in the manual must also be carefully observed and followed.

6.Use Archgard BCV5 connector kit to connect the insert to the host’s B-vent or connect a 4” diameter flexible aluminum gas vent from the insert to the host’s vent cap.

BEND

TO

15 ¼”

ITEM 4.

ITEM 2.