EURO 25 -1

29

APPENDIX A

EURO 25-1- INSTRUCTIONS FOR

INSTALLATION INTO VENTED GAS FIREPLACES

The Euro 25-1 may be retro-fitted into the following fireplaces:

CANADIAN HEATING PRODUCTS - MONTIGO 28 SERIES

FIREHEARTH / MONTEREY - FIRESONG 220 SERIES

ARCHGARD - MARQUIS T-100 SERIES

GASGLO - GG 28 SERIES

FMI - 450 and 850 SERIES

PRECAUTIONS

This installation must be conducted by a qualified gas appliance installer and the installation must conform to the installation codes.

This EURO 25-1 gas insert will only fit into the gas fireplaces on Archgard’s list of suitable gas fireplaces. Each of these fireplaces have been tested and approved for use with the EURO 25-1. Please contact Archgard Industries for an updated list of gas fireplaces and any additional installation instructions.

The host gas fireplace’s certification will be nullified and will no longer be usable for its original purpose. A warning plate, provided with the EURO 25-1 insert, must be attached to the back of the host fireplace’s firebox.

The EURO 25-1 gas insert must be properly connected to a venting system as shown in the instructions.

Follow all applicable instructions in the manual.

Page 29
Image 29
Delkin Devices EI - 25-1 manual Appendix a, Precautions