Dell 1501 owner manual Printer Problems, Ensuring Sufficient Power for Your Computer

C H E C K T H E AC A D A P T E R — Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on.

C O N N E C T T H E C O M P U T E R D I R E C T L Y T O A N E L E C T R I C A L O U T L E T — Bypass power protection devices, power

strips, and the extension cable to verify that the computer turns on.

E L I M I N A T E P O S S I B L E I N T E R F E R E N C E — Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances.

A D J U S T T H E P O W E R P R O P E R T I E S — See "Power Management Modes" on page 41.

R E S E A T T H E M E M O R Y M O D U L E S — If the computer power light turns on but the display remains blank, reinstall the memory modules (see "Memory" on page 92).

Ensuring Sufficient Power for Your Computer

Your computer is designed to use the 65-W AC adapter; you may choose to use the optional 90-W AC adapter for optimum system performance. Use of the 90-W AC adapter may decrease the length of time required to fully recharge your computer battery.

Printer Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTE: If you need technical assistance for your printer, contact the printer’s manufacturer.

E N S U R E T H A T T H E P R I N T E R I S T U R N E D O N

C H E C K T H E P R I N T E R C A B L E C O N N E C T I O N S —

•See the printer documentation for cable connection information.

•Ensure that the printer cables are securely connected to the printer and the computer.

TE S T T H E E L E C T R I C A L O U T L E T — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

VE R I F Y T H A T T H E P R I N T E R I S R E C O G N I Z E D B Y W I N D O W S —

1Click the Start button, click Control Panel, and then click Printers and Other Hardware.

2Click View installed printers or fax printers.

If the printer is listed, right-click the printer icon.

3Click Properties and click the Ports tab. For a parallel printer, ensure that the Print to the following port(s): setting is LPT1 (Printer Port). For a USB printer, ensure that the Print to the following port(s): setting is USB.

R E I N S T A L L T H E P R I N T E R D R I V E R — See the printer documentation for instructions.

Solving Problems

75