Dell 1501 owner manual If you are replacing a memory module, remove the existing module

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

3If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

1

2

1 securing clips	2	memory module
(2 per connector)

Adding and Replacing Parts

93