Adding Parts 73
7Secure the filler bracket onto the end of the card with the screw you
removed in step5.
8Connect any cables required for the card as described in the card
documentation.
NOTICE: Do not route card cables over or behind the cards. Cables routed
over the cards can cause damage to the equipment.
9Replace the computer cover (see page82).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
10 Connect your computer and devices to electrical outlets, and turn
them on.
11 Install any drivers required for the card as described in the card
documentation.
fully seated not fully seated
bracket caught
outside of slot
bracket within slot