![](/images/new-backgrounds/1192731/192731299x1.webp)
Exit
Save Changes and Reset Allows you to save changes and exit system setup
Discard Changes and Allows you to discard changes and exit system setup Reset
Load Default | Allows you to restore the default settings |
|
|
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
•Diskette Drive — The computer attempts to boot from the floppy drive. If no operating system is on the drive, the computer generates an
error message.
•Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.
•
•USB Storage Device — Insert the memory device into a USB port and restart the computer. When F12 Boot Options appears in the
NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.
•Network — The computer attempts to boot from the network. If no operating system is found on the network, the computer generates an error message.
150
System Setup