Dell 2330 owner manual Replacing the Processor

Replacing the Processor

Procedure

1Unpack the new processor, being careful not to touch the underside of the processor.

CAUTION: Ground yourself by touching an unpainted metal surface.

CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor.

2If the release lever on the socket is not fully extended, move it to that position.

3Orient the alignment notches on the processor with the alignment tabs on the socket.

4Align the pin-1 corners of the processor and socket, and then place the processor in the processor socket. Set the processor lightly in the socket and ensure that the processor is positioned correctly.

CAUTION: Ensure that the processor cover notch is positioned underneath the alignment post.

5When the processor is fully seated in the socket, close the processor cover.

6Pivot the release lever down and place it under the tab on the processor cover.

1
	3		5	6
	2		4
1	processor pin-1 indicator	2	processor
3	alignment notches (2)	4	alignment post
5	processor cover	6	release lever

Processor

75