Replacing the Wireless Mini-Card

Procedure

1Align the notch on the Mini-Card with the tab on the system-board connector.

CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you use excessive force, you may damage the connector.

CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the Mini-Card and on the system board, and realign the Mini-Card.

CAUTION: To avoid damage to the Mini-Card, never place cables under the Mini-Card.

2Insert the Mini-Card connector at a 45-degree angle into the system-board connector.

3Press the other end of the Mini-Card down into the slot on the system board and replace the screws that secure the Mini-Card to the system-board connector.

4Connect the antenna cables to the connectors on the Mini-Card.

The following table provides the antenna cable color scheme for the Mini-Card supported by your computer.

Connectors on the Mini-Card

Antenna Cable Color Scheme

 

 

WLAN + Bluetooth (2 cables)

 

Main WLAN + Bluetooth (white triangle)

white

Auxiliary WLAN + Bluetooth (black triangle)

black

 

 

Postrequisites

1Replace the system-board shield.

See "Replacing the System-Board Shield" on page 51.

2Replace the VESA-mount bracket.

See "Replacing the VESA-Mount Bracket" on page 44.

Wireless Mini-Card

59

Page 59
Image 59
Dell 2330 owner manual Replacing the Wireless Mini-Card, Wlan + Bluetooth 2 cables