Replacing the I/O Board Shield

1Connect the power-supply fan cable and infrared cable to the system-board connectors.

2Connect the antenna cable to the connector on the TV tuner card.

3Slide the power port and the power-supply control board through the slot on the I/O board shield.

4Align the screw holes on the I/O board shield with the screw holes on the chassis.

5Replace the screws that secure the I/O board shield to the chassis.

6Replace the screw that secures the power-supply control board to the I/O board shield.

7Replace the screws that secure the power port to the I/O board shield.

1Replace the I/O cover. See "Replacing the I/O Cover" on page 83.

2Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.

3Replace the power-supply fan bracket.

See "Replacing the Power-Supply Fan Bracket" on page 79.

4Replace the system-board shield.

See "Replacing the System-Board Shield" on page 51.

5Replace the VESA-mount bracket.

See "Replacing the VESA-Mount Bracket" on page 44.

6Replace the back cover. See "Replacing the Back Cover" on page 24.

7Replace the stand. See "Replacing the Stand" on page 21.

8Follow the instructions in "After Working Inside Your Computer" on page 13.

I/O Board Shield

Dell 2330 owner manual Replacing the I/O Board Shield