144 Configuring System Information
www.dell.com | support.dell.com
•Source IP Address—Indicates the interface Source IP Address to which the packet is
matched.
•Network Mask—Indicates the interface network mask to which the packet is matched.
•Prefix Length—Indicates the prefix length to which the packet is matched.
•Action—Defines the Management Security Rule action. The possible field values are:
–Permit—Permits management access to the defined interface.
–Deny—Denies management access to the defined interface.
3Define the Access Profile Name field.
4Define the Rule Priority, Management Method, Interface, Source IP, Network Mask,
Prefix Length, and Action fields.
5Click Apply Changes. The new Access Profile is added, and the device is updated.
Adding Rules to Access Profile:
NOTE: The first rule must be defined to begin matching traffic to access profiles.
1Open the Access Profiles page.
2Click Add Rule to Profile. The Add An Access Profile Rule page opens.
Add An Access Profile Rule Page
The Add An Access Profile Rule page contains the following fields:
•Access Profile Name—Indicates the name of the Access Profile.
•Rule Priority (1-65535)—Indicates the rule priority.