Dell 3324, 3348 Aggregating Ports

272 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console (config)# gvrp enable
Console (config)# interface ethernet 1/e8
Console (config-if)# gvrp enable
Console (config-if)# gvrp-vlan-creation-forbid
Console (config-if)# gvrp registration-forbid
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 256, Maximum VLANs after reset: 256.
Port(s)StatusRegistrationDynamic VLANTimers (milliseconds)
CreationJoinLeaveLeave All
----------------------------------------------
2/1EnabledNormalEnabled20060010000
4/4EnabledNormalEnabled20060010000
Aggregating Ports
Port Aggregation optimizes port usage by linking a group of ports together to form a single
Link Aggregated Group (LAG). Port Aggregation multiplies the bandwidth between the
devices, increases port flexibility, and provides link redundancy. Both the PowerConnect
3324 and PowerConnect 3348 support up to six LAGs, and eight ports per LAG per stack or
stand-alone unit.
Each LAG is composed of ports of the same speed, set to full-duplex operations. Ports in a
LAG, can be of different media types (UTP/Fiber, or different fiber types), provided they
operate at the same speed.
show gvrp configuration
[ethernet interface | port-
channel port-channel-
number]
Displays GVRP configuration
information, including timer values,
whether GVRP and dynamic VLAN
creation is enabled, and which ports are
running GVRP.
gvrp max-vlan number Configures the maximum number of
VLANs when GVRP is enabled.
CLI Command Description