Configuring System Information 131
–Port—Indicates that the IP address was assigned to a port.
–LAG—Indicates that the IP address was assigned to a Link Aggregated Group
(LAG).
–VLAN—Indicates that the IP address was assigned to a VLAN.
•Ty p e —Indicates whether the IP address was defined manually as a static IP address or
automatically through DHCP.
•Remove—Removes the selected interface from the IP Address drop-down list.
–Checked—Removes the interface from the IP Address drop-down list.
–Unchecked—Maintains the interface in the IP Address drop-down list.
Adding an IP Interface:
1Open the IP Interface Parameters page.
2Click Add. The Add a Static IP Interface page opens:
Add A Static IP Interface Page
3Define the IP Address, Interface, Network Mask, or the Prefix Length fields.
4Select the interface to which the IP interface will be assigned.
5Click Apply Changes. The new interface is added, and the device is updated.
Displaying the IP Interface Table:
1Open the IP Interface Parameters page.
2Click Show All. The IP Interface Table page opens. The IP Interface Table contains
the same fields as the "Defining IP Interfaces".