218 Configuring Switch Information
www.dell.com | support.dell.com
•Current LAG Status—Specifies the LAG status. The possible field values are:
–Up—Indicates the LAG is currently operating.
–Down—Indicates the LAG is currently non-operational.
•Admin Auto Negotiation—Enables Auto Negotiation on the LAG. Auto-negotiation
is a protocol between two link partners that enables a LAG to advertise its
transmission rate, duplex mode, and flow control (the flow control default is disabled)
abilities to its partner. The possible field values are:
–Enable—Enables auto negotiation on the LAG.
–Disable—Disables auto negotiation on the LAG.
•Current Auto Negotiation—Indicates the current Auto Negotiation setting. The
possible field values are:
–Enable
– Disable
•Admin Speed—Indicates the speed at which the LAG is operating. This value can be
entered only if the LAG is disabled. The possible field values are:
–10M
–100M
– 1000M
•Current LAG Speed—Specifies the synchronized LAG speed in bps. The possible
field values are:
–10M
–100M
– 1000M
•Current Duplex Mode—Specifies the LAG conversation type. The current field
values are:
–Full—The interface supports transmission between the device and the client in
both directions simultaneously.
–Half—The interface supports transmission between the device and the client in
only one direction at a time.
•Admin Current Duplex Mode—Specifies the LAG conversation type. The current
field values are:
–Full—The interface supports transmission between the device and the client in
both directions simultaneously.